|
Element
|
Number of the current element |
|
Data in the table
|
| Setting | Description |
|---|
| Elem |
Element number - increasing order |
| Type |
Element type (see Structure > Elements > Info ) |
| CSBeg |
Cross-section type assigned to the element begin |
| CSEnd |
Cross-section type assigned to the element end |
| CS type |
Type of the cross-section eccentricity
- YoZo: no cross-section eccentricity considered (reference point = CG)
- YlZo: cross-section eccentricity in y direction considered
- YoZl: cross-section eccentricity in z direction considered
- YlZl: cross-section eccentricity in y and z direction considered
|
|
|
Cross sections values or spring constants respectively
|
The 4 rows on the right edge contain the cross-section properties of beam and cable elements, or the spring constants of spring elements respectively. Two lines are provided for each element: the first one contains the CS areas or the displacement spring constants, the 2nd the moments of inertia or the rotation spring constants. | Setting | Description |
|---|
| Ax, Ay, Az |
Cross section area and shear areas for shear forces Qy, Qz |
| Ix, Iy, Iz |
Moments of inertia (torsion, bending around y, bending around z) |
| U, UIN |
Outside perimeter length, inside perimeter of hollow boxes |
| Cx, Cy, Cz |
Spring constants for the displacements in x, y and z direction |
| CMx, CMy, CMz |
Rotational spring constants for rotations around x, y and z. Note: For the different subtypes of spring elements, the values represent the respective parameters governing the behaviour of the spring element.
|
|
